HTTP & SOCKS Rotating Residential
- 32 million IPs for all purposes
- Worldwide locations
- 3 day moneyback guarantee
How to Change IP Address if You Get Banned – Trust.Zone
29 August 2017When you connect to the Internet, your ISP (Internet Service Provider) assigns an IP address to your computer, mobile device, tablet or other network device. Depending on the type internet access, you may be allocated to use static IP address or dynamic IP address.
Sometimes, your IP address can be banned and you cannot access your favorite websites. IP address is banned usually because a computer or person was doing something inappropriately.
So, why do you get banned?
You were entering incorrect username or password multiple times on some website. It may to a ban from the website you are trying to log have a few accounts under the same IP address. Some websites don’t allow were cheating the broke the rules or terms and conditions of the website/serviceYour PC or network is compromised with malware and it sent out hundreds of spam emails a minute and are banned from a game server if game provider caught cheating from your side (wrong software license / serial number, cheating the game server, violation any other rules)
There a few ways how to bypass an IP address ban. You can try to change your IP address manually if you modem/router or PC allows IP address modification. Yet another way – you can overcome IP address ban with a proxy or VPN. We have listed possible ways to unblock your IP address below:
How to Change IP Address in Windows?
If you are connecting via ADSL line, disconnect your ADSL line from your modem/router and reconnect again. Also, you can reset your modem/router.
If you are on cable, do the following steps:
– Go to “Start”
– Click on “Run” or type “cmd” (without quotes)
– Enter ‘ipconfig /release’ (without quotes)
– Enter ‘ipconfig /renew’ (without quotes)
How to change IP Address on Mac OS X?
– Close all applications connected to the Internet.
– Go to System Preferences.
– Go to the View menu and select Network.
– Go to the Show menu and choose Active Network Ports.
– Deselect the checkbox for the port you use to connect to the Internet.
– Press Apply Now, reselect the port checkbox and click Apply Now ’t help? Then you need a VPN solution.
What’s a VPN?
A VPN, or Virtual Private Network is a point-to-point connection across a private network or Internet. The VPN will rout your internet traffic to their servers, access the internet on your behalf, and then transfer the data or information back to you.
VPN is able to change your IP address. If you connect to VPN server – your IP will be replaced by IP address of the VPN server. If you choose to encrypt as well as anonymize, even your ISP won’t be able to see what you’re doing and visiting. Besides that, with a VPN, you are able to unblock GEO restrictions for game servers – you can play games online without restrictions. If your favorite video streaming service blocked you from accessing the video and music – you can also bypass restrictions with a VPN too.
One of the best VPN solutions to change your IP address is VPN service. VPN hides and replaces your real IP address with IP address of VPN server, secures and encrypts your internet connection.
gives you access to dozens of the servers from around the world. For example, if you can’t connect to your favorite website because your IP address has been banned – you can try to connect to VPN service provider and change your location to another location from around the world.
Is your IP Address Banned? – Change your IP address with VPN for
HTTP Rotating & Static
- 200 thousand IPs
- Locations: US, EU
- Monthly price: from $39
- 1 day moneyback guarantee
Blocking IP Addresses | Microsoft Docs
Blocking IP Addresses | Microsoft Docs
Skip to main content
This browser is no longer supported.
Upgrade to Microsoft Edge to take advantage of the latest features, security updates, and technical support.
2 minutes to read
In this article
If you want Clarity to stop tracking certain IP addresses, you can add them to a blocklist. This excludes internal IPs such that related data isn’t added to data gathered from your site’s visitors.
Dashboard: Site visitors on the list won’t contribute to the tracked metrics.
Recordings: No sessions from visitors on the list are recorded.
Heatmaps: Site visitors on the list won’t have their activity included on click maps or scroll maps.
Clarity only supports IPv4 addresses. We do not support IPv6 or dynamic IP addresses.
Block an IP address from tracking
To set up IP exclusion, you need to be an administrator for your project. If you aren’t, you can see which IP addresses are blocked, but you can’t change anything.
Go to Clarity > Settings > IP blocking, and select Block IP address.
On the Block IP address screen, make your selections and then select Block.
Name: Enter a friendly name to identify the IP address.
Block my current IP: Check the box if you want to exclude your IP address.
IP address: Enter the IP address.
You can also block a range of IP addresses. See the next section for details.
Once you’ve entered one or more IP addresses, each one is displayed in a list on the IP blocking page.
You may need to wait about 15 minutes for the changes to come into effect.
Block a range of IP addresses
If you want to block a whole range of IP addresses, you don’t need to enter them one by one.
On the Block IP address screen, make your selections and select Add.
Name: Enter a friendly name to identify the range of IP addresses.
IP address: Enter a set of specific IP addresses you would like to block. If you want to block of range of contiguous IP addresses, you can specify them individually. However, you can also use the CIDR range of the form
Stop blocking an IP address
Go to Clarity > Settings > IP blocking, and select the
icon to the right of the IP address you want to unblock.
On the Unblock this IP address screen, select Unblock.
Verify that an IP address is blocked
You can verify that an IP address is blocked if you visit the page from that IP address.
Browsing with a blocked IP address, go to the webpage you want to verify.
A message is displayed at the top of the console: “Data from this session is not being collected by Microsoft Clarity due to your configured project settings. ”
For more answers, refer to General FAQ.
IP address blocking – Wikipedia
IP address blocking is a configuration of a network service that blocks requests from hosts with certain IP addresses. IP address blocking is commonly used to protect against brute force attacks and to prevent access by a disruptive address.
IP address blocking can be used to restrict access to or from a particular geographic area, for example, the syndication of content to a specific region through the use of Internet geolocation and blocking. 
How it works
Every device connected to the Internet is assigned a unique IP address, which is needed to enable devices to communicate with each other. With appropriate software on the host website, the IP address of visitors to the site can be logged and can also be used to determine the visitor’s geographical location. 
Logging the IP address can, for example, monitor if a person has visited the site before, for example to vote more than once, as well as to monitor their viewing pattern, how long since they performed any activity on the site (and set a time out limit), besides other things.
Knowing the visitor’s geo-location indicates, besides other things, the visitor’s country. In some cases requests from or responses to a certain country would be blocked entirely. Geo-blocking has been used, for example, to target Nigerian IP addresses due to the perception that all business originating from the country is fraudulent, thus making it extremely difficult for legitimate businesses based in the country to interact with their counterparts in the rest of the world. To make purchases abroad, Nigerians must rely on proxy servers to disguise the true origin of an Internet request. 
Internet users may circumvent geo-blocking and censorship and protect personal identity and location to stay anonymous on the internet using a VPN connection.
On a website, an IP address block can prevent a disruptive address from access, though a warning and/or account block may be used first. Dynamic allocation of IP addresses by ISPs can complicate incoming IP address blocking, rendering it difficult to block a specific user without blocking many IP addresses (blocks of IP address ranges), thereby creating collateral damage.
Unix-like operating systems commonly implement IP address blocking using a TCP wrapper, configured by host access control files /etc/ and /etc/
Both companies and schools offering remote user access use Linux programs such as DenyHosts or Fail2ban for protection from unauthorised access while allowing permitted remote access. This is also useful for allowing remote access to computers. It is also used for Internet censorship.
Proxy servers and other methods can be used to bypass the blocking of traffic from IP addresses.  However, anti-proxy strategies are available. Consumer-grade internet routers can sometimes obtain a new public IP address on demand from the internet service provider using DHCP lease renewal to circumvent individual IP address blocks, but this can be countered by blocking the range of IP addresses from which the internet service provider is assigning new IP addresses, which is usually a shared IP address prefix. However, this may impact legitimate users from the same internet service provider who have IP addresses in the same range, which inadvertently creates a denial-of-service attack.
In a 2013 United States court ruling in the case Craigslist v. 3Taps, US federal judge Charles R. Breyer held that circumventing an address block to access a website is a violation of the Computer Fraud and Abuse Act (CFAA) for “unauthorized access”, punishable by civil damages.
^ The John Marshall Journal of Computer & Information Law, Center for Computer/Law, 2003
^ “What is an IP address? “. HowStuffWorks. 2001-01-12. Retrieved 2019-12-13.
^ “How cookies track you around the web & how to stop them”. 2018-02-24. Retrieved 2019-12-13.
^ “How to: Circumvent Online Censorship”. Archived from the original on 2018-12-23.
Media related to IP address blocking at Wikimedia Commons
Frequently Asked Questions about ban ip addresses
Why would an IP address be banned?
IP address is banned usually because a computer or person was doing something inappropriately. So, why do you get banned? You were entering incorrect username or password multiple times on some website. It may to a ban from the website you are trying to log in.Aug 29, 2017
How do I block certain IP addresses?
If you want to block a whole range of IP addresses, you don’t need to enter them one by one.Go to Clarity > Settings > IP blocking, and select Block IP address.On the Block IP address screen, make your selections and select Add. Name: Enter a friendly name to identify the range of IP addresses.