- HTTP & SOCKS
- Price $1.3/IP
- Locations: DE, RU, US
- 5% OFF coupon: APFkysWLpG
What’s the Difference Between IPv4 and IPv6? – Guru99
What is IP?
An IP (Internet Protocol) address is a numerical label assigned to each device connected to a computer network that uses the IP protocol for communication. An IP address acts as an identifier for a specific device on a particular network. The IP address is also called an IP number or Internet address.
IP address specifies the technical format of the addressing and packets scheme. Most networks combine IP with a TCP (Transmission Control Protocol). It also allows developing a virtual connection between a destination and a source.
Now in this IPv4 and IPv6 difference tutorial, we will learn What is IPv4 and IPv6?
What is IPv4?
IPv4 is an IP version widely used to identify devices on a network using an addressing system. It was the first version of IP deployed for production in the ARPANET in 1983. It uses a 32-bit address scheme to store 2^32 addresses which is more than 4 billion addresses. It is considered the primary Internet Protocol and carries 94% of Internet traffic.
What is IPv6?
IPv6 is the most recent version of the Internet Protocol. This new IP address version is being deployed to fulfill the need for more Internet addresses. It was aimed to resolve issues that are associated with IPv4. With 128-bit address space, it allows 340 undecillion unique address space. IPv6 is also called IPng (Internet Protocol next generation).
Internet Engineer Taskforce initiated it in early 1994. The design and development of that suite are now called IPv6.
IPv4 is 32-Bit IP address whereas IPv6 is a 128-Bit IP address.
IPv4 is a numeric addressing method whereas IPv6 is an alphanumeric addressing method.
IPv4 binary bits are separated by a dot(. ) whereas IPv6 binary bits are separated by a colon(:).
IPv4 offers 12 header fields whereas IPv6 offers 8 header fields.
IPv4 supports broadcast whereas IPv6 doesn’t support broadcast.
IPv4 has checksum fields while IPv6 doesn’t have checksum fields
When we compare IPv4 and IPv6, IPv4 supports VLSM (Variable Length Subnet Mask) whereas IPv6 doesn’t support VLSM.
IPv4 uses ARP (Address Resolution Protocol) to map to MAC address whereas IPv6 uses NDP (Neighbour Discovery Protocol) to map to MAC address.
Features of IPv4
Following are the features of IPv4:
Allow creating a simple virtual communication layer over diversified devices
It requires less memory, and ease of remembering addresses
Already supported protocol by millions of devices
Offers video libraries and conferences
Features of IPv6
Here are the features of IPv6:
Hierarchical addressing and routing infrastructure
Stateful and Stateless configuration
Support for quality of service (QoS)
An ideal protocol for neighboring node interaction
IPv4 vs IPv6
Difference Between IPv4 and IPv6 Addresses
IPv4 & IPv6 are both IP addresses that are binary numbers. Comparing IPv6 vs IPv4, IPv4 is 32 bit binary number while IPv6 is 128 bit binary number address. IPv4 address are separated by periods while IPv6 address are separated by colons.
Both are used to identify machines connected to a network. In principle, they are the same, but they are different in how they work. Below are the main differences between IPv4 and IPv6:
Basis for differences
Size of IP address
IPv4 is a 32-Bit IP Address.
IPv6 is 128 Bit IP Address.
IPv4 is a numeric address, and its binary bits are separated by a dot (. )
IPv6 is an alphanumeric address whose binary bits are separated by a colon (:). It also contains hexadecimal.
Number of header fields
Length of header filed
Has checksum fields
Does not have checksum fields
12. 244. 233. 165
Type of Addresses
Unicast, broadcast, and multicast.
Unicast, multicast, and anycast.
Number of classes
IPv4 offers five different classes of IP Address. Class A to E.
lPv6 allows storing an unlimited number of IP Address.
You have to configure a newly installed system before it can communicate with other systems.
In IPv6, the configuration is optional, depending upon on functions needed.
IPv4 support VLSM (Variable Length Subnet mask).
IPv6 does not offer support for VLSM.
Fragmentation is done by sending and forwarding routes.
Fragmentation is done by the sender.
Routing Information Protocol (RIP)
RIP is a routing protocol supported by the routed daemon.
RIP does not support IPv6. It uses static routes.
Networks need to be configured either manually or with DHCP. IPv4 had several overlays to handle Internet growth, which require more maintenance efforts.
IPv6 support autoconfiguration capabilities.
Widespread use of NAT (Network address translation) devices which allows single NAT address can mask thousands of
non-routable addresses, making end-to-end
It allows direct addressing because of vast address
Use for the designated network from host portion.
SNMP is a protocol used for system management.
SNMP does not support IPv6.
Mobility & Interoperability
Relatively constrained network topologies to which move restrict mobility and interoperability capabilities.
IPv6 provides interoperability and mobility
capabilities which are embedded in network devices.
Security is dependent on applications – IPv4 was not designed with security in mind.
IPSec(Internet Protocol Security) is built into the IPv6 protocol, usable with
a proper key infrastructure.
Packet size 576 bytes required, fragmentation optional
1208 bytes required without fragmentation
Allows from routers and sending host
Sending hosts only
Does not identify packet flow for QoS handling which includes checksum options.
Packet head contains Flow Label field that specifies packet flow for QoS handling
Address (A) records, maps hostnames
Address (AAAA) records, maps hostnames
Manual or via DHCP
Stateless address autoconfiguration using Internet Control Message Protocol version 6 (ICMPv6) or DHCPv6
IP to MAC resolution
Multicast Neighbour Solicitation
Local subnet Group management
Internet Group Management Protocol GMP)
Multicast Listener Discovery (MLD)
Has Optional Fields
Does not have optional fields. But Extension headers are available.
Internet Protocol Security (IPSec) concerning network security is optional
Internet Protocol Security (IPSec) Concerning network security is mandatory
Dynamic host configuration Server
Clients have approach DHCS (Dynamic Host Configuration server) whenever they want to connect to a network.
A Client does not have to approach any such server as they are given permanent addresses.
Uses ARP(Address Resolution Protocol) to map to MAC address
Uses NDP(Neighbour Discovery Protocol) to map to MAC address
Combability with mobile devices
IPv4 address uses the dot-decimal notation. That’s why it is not suitable for mobile networks.
IPv6 address is represented in hexadecimal, colon- separated notation.
IPv6 is better suited to mobile
IPv4 and IPv6 cannot communicate with other but can exist together on the same network. This is known as Dual Stack.
HTTP Rotating & Static
- 40 million IPs for all purposes
- 195+ locations
- 3 day moneyback guarantee
Everything You Need to Know About IPv4 vs. IPv6
The “IP” in IPv4 and IPv6 stands for Internet Protocol, which is a set of rules that determine how devices transmit data packets across the Internet. Internet Protocol also assigns a unique address to each device on the web. These addresses ensure data packets are routed to the correct device.
What is IPv4?
IPv4 or Internet Protocol Version 4 is the most common protocol for transmitting data packets on the web. IPv4 provides both the identification (IP addresses) for each device on the Internet and the rules that govern how data packets are transmitted between those devices.
With IPv4, a typical IP address has 32 bits and is in dotted-decimal form, like this:
192. 0. 2. 235
Because there are only 232 unique hosts in this decimal format, there are only about 4. 3 billion IPv4 addresses.
What is IPv6?
There’s been a massive increase in devices connected to the Internet in the last decade—with a rise from 5 Internet devices per household to 50 Internet devices per household from 2015 to 2020. This prompted the Internet Engineering Tracking Taskforce (IETF) to create a new Internet protocol, IPv6. It was released in December 1998.
IPv6 addresses are written in hexadecimal format, like this:
The Pros of IPv4 vs. IPv6
Despite IPv6 being the newer, updated IP, there are still many advantages of IPv4.
Existing infrastructure – Most websites use IPv4, even those that also support IPv6. This makes version four a more seamless experience. That is, until most of the Internet switches to version six.
Simplicity – IPv4’s 32-bit dotted decimal is much smaller and simpler than IPv6’s hexadecimal numbers. This simplicity is easier for humans to read.
Support – Because most traffic is still using IPv4, Network operators find IPv4 familiar. They may wait until more traffic is IPv6 before they make any decisions about their own infrastructure—especially if they have enough IPv4 addresses for the near future.
The Cons of IPv4 vs. IPv6
Running short on IPv4 addresses isn’t the only con of version four.
Exhaustion of IPv4 – As we’ve covered, the world is short on IPv4 addresses. This means there’s a cost to buy IPv4 addresses, where IPv6 addresses can be had (in unimaginable quantities) for the cost of registration with a regional registry (RIR). You also pay registry costs with IPv4.
IPv6 Speed – Web and cloud services provider, Akamai, measured the speed of IPv6 vs. IPv4. They found, “Sites load 5% faster in median and 15% faster for the 95% percentile on IPv6 compared to IPv4. ”
Network Address Translation (NAT) for IPv4 – NAT allows a group of devices (usually 10-20) that share a single public IP with IPv4. This requires complex configurations like forwarding and firewall alterations. Because IPv6 has so many addresses, IPv6 devices don’t require additional configuration.
Understanding the IPv4 market
The pros of IPv4, combined with the lack of addresses, created a new marketplace. Today, companies that need IPv4 addresses can buy them through IPv4 Brokers, or a company looking to move to IPv6 can sell IPv4 addresses.
When a company needs more IP addresses, they have three options:
Buy IPv4 addresses – That’s what is here for. Companies can also sell their IPv4 addresses if they’re beginning to deploy IPv6.
Use NAT – As mentioned above, NAT allows one address to be shared among many devices. However, NAT still requires one IPv4 address (usually one per 10-20 people). This has some drawbacks, namely speed issues as packets have to transition paths.
Deploy IPv6 – A business can deploy IPv6, but this may be of limited usefulness until most traffic is also on IPv6. So, even if a business deploys IPv6, it still needs more IPv4 addresses or NAT.
There’s much debate around which is better—IPv4 or IPv6. But really, it’s about your specific needs. If you’d like more information on the differences between IPv4 vs. IPv6, or if you’re looking for help with either, please reach out to us today.
Should I use IPv6 only or both IPv4 and IPv6 in my web server?
You should use both IPv4 and IPv6 addresses.
Nearly everyone on the Internet currently has an IPv4 address, or is behind a NAT of some kind, and can access IPv4 resources.
However, at the time of writing only about 0. 7% 2. 3% 3. 8% 6. 5% 9% 12% 19% 22% 26% 32% of the Internet is IPv6 capable, but that number is steadily growing as IPv6 begins to roll out worldwide.
In a very few places, ISPs are providing primarily IPv6 or only IPv6 to residential customers and using large scale NAT, NAT64 or other such solutions for IPv4 connectivity. This number is expected to grow as IPv4 address space is finally exhausted. These users will typically have better performance over IPv6.
Where ISPs have deployed large scale NAT to solve IPv4 exhaustion, users stuck with this will suffer reduced reliability of all their Internet connections due to the connection limits inherent in the large scale NAT gateways. For instance, a web page might only load some but not all of its resources, leaving broken icons where images should be, missing styles and scripts, etc. This is similar to connection limit exhaustion on a home router, but affecting all users of the ISP intermittently and seemingly randomly. If you want your site to be reliable for these users, you must serve it via IPv6 (and the ISP must have deployed IPv6).
Since IPv6 is where the Internet is going, having your web site IPv6 enabled now puts you ahead of the game and lets you resolve any problems long before they become serious.
By default with Linux and nginx, you can bind to both IPv4 and IPv6 at the same time by changing your listen directives to:
Or, for SSL sites:
listen [::]:443 ssl;
listen 443 ssl;
Frequently Asked Questions about ivp4 vs ipv6
Which is faster IPv4 or IPv6?
IPv6 Speed – Web and cloud services provider, Akamai, measured the speed of IPv6 vs. IPv4. They found, “Sites load 5% faster in median and 15% faster for the 95% percentile on IPv6 compared to IPv4.”Aug 18, 2020
Should I use IPv4 or IPv6?
You should use both IPv4 and IPv6 addresses. Nearly everyone on the Internet currently has an IPv4 address, or is behind a NAT of some kind, and can access IPv4 resources.
What is IPv4 and IPv6 difference between them?
IPv4 uses a 32-bit address for its Internet addresses. … IPv6 utilizes 128-bit Internet addresses. Therefore, it can support 2^128 Internet addresses—340,282,366,920,938,463,463,374,607,431,768,211,456 of them to be exact. The number of IPv6 addresses is 1028 times larger than the number of IPv4 addresses.