How to Set Up a Static IP Address | PCMag
PCMag editors select and review products independently. If you buy through affiliate links, we may earn commissions, which help support our testing. Learn more.
DHCP is fine, unless you’re looking to perform advanced networking tasks. Here’s how to set a Static IP address (or DHCP reservation) for any device on your network.
When you have a lot of devices on your network—computers, network attached storage, and Raspberry Pis—it can be annoying to constantly look up their IP addresses when you need to access them remotely. Make your life easier with a set of unchanging, static IP addresses for those vs. Static IP Address
Your router assigns IP addresses to devices on your network using DHCP, or Dynamic Host Configuration Protocol. As you connect new devices to the network, they’ll be assigned the next IP address in the pool, and if a device hasn’t connected in a few days, its IP address will “expire” so it can be assigned to something everyday use, this is perfectly fine, and you’ll never even notice it happening in the background. But if you regularly SSH into your Raspberry Pi, use Wake-on-LAN to turn your computer on from across the house, or perform other advanced networking tasks, DHCP can become an ‘s hard to remember which IP address is assigned to which device, and if they ever expire, you have to look it up all over again. That’s where a static IP address comes in handy.
Instead of letting your router assign whatever IP address is free at any given time, you can assign specific IP addresses to the devices you access frequently. For example, I have my home server set to 192. 168. 1. 10, my main desktop to 192. 11, and so on—easy to remember, sequential, and can assign these static IP addresses on the device itself—using, say, Windows’ network settings on each computer—or you can do it at the router level. Doing it at the router level is called assigning a DHCP reservation, though many people (and even some routers) still refer to it as a “static IP address. “DHCP reservations allow you to easily set everything up in one place with all your computers left at their default settings. Your computer will ask for an IP address via DHCP, and your router will assign it the one you’ve reserved, with your computer being none the to Set Up a DHCP Reservation
To set up a DHCP reservation, head to your router’s configuration page—usually by typing its IP address in your browser’s navigation bar—and log in. (If you’re using a mesh Wi-Fi system with an app instead of a config page, you’ll find these settings in the app. )The location is different for every config page, but you’re looking for something called “DHCP reservations, ” “static IP addresses, ” or something similar—on my Asus router, it’s in the LAN settings assign a reservation, you’ll need the MAC address of the device in question. This is a unique string of characters that identifies a particular network adapter, and you can usually find it in your router’s list of connected devices. Make sure you’re getting the MAC address for the correct network adapter—if you have both Ethernet and Wi-Fi on your computer, you’ll have one MAC address for your router’s config page, enter an easy-to-remember label for the device (like “Whitson’s Desktop PC”), the MAC address, and your desired IP address. Save your changes, and repeat the process for any other IP addresses you want to then on, those devices should have your reserved IP addresses assigned to them, and you’ll never have to look them up again.
Like What You’re Reading?
Sign up for Tips & Tricks newsletter for expert advice to get the most out of your technology.
This newsletter may contain advertising, deals, or affiliate links. Subscribing to a newsletter indicates your consent to our Terms of Use and Privacy Policy. You may unsubscribe from the newsletters at any time.
How do I check for static network settings on my devices?
Static network settings set on a device from a previous connection will interfere with the FlashRouter’s network. Typically the FlashRouter’s network performs best when connected devices are set to automatically use the FlashRouter’s IP Address and DNS.
Make sure you are connected to the FlashRouter’s network via ethernet or WiFi. Keep in mind these instructions may vary based on your current software version.
Check for Static IP Address in Windows
1. Open the Window search box, and search “Network Status”
2. Select “Change adapter optons”
3. Right click on the WiFi and/or ethernet adapter and select Properties.
4. Highlight Internet Protocol Version 4 (TCP/IPv4) and click Properties.
5. Delete the values entered for IP address, Subnet mask, Default gateway, Preferred DNS server, and Alternate DNS server.
6. Select Obtain an IP address automatically and Obtain DNS server address automatically.
7. Click OK.
Check for Static IP Address in Apple / Mac
1. Open System Preferences, and select Network.
2. Select the adapter that is connected via ethernet or wireless. This will vary based on your current connection.
3. Select Advanced.
4. Select the TCP/IP tab.
5. Set Configure IPv4 to Automatically.
6. Select the DNS field and highlight any DNS servers you see there. If they can be removed you should click the minus symbol below.
8. Click Apply.
Check for Static IP Address in iOS
1. Open Settings
2. Select WiFi, and select the blue icon next to your current connection.
3. Make sure Configure IP is set to Automatically.
Check for Static IP Address in Android
1. From the top of the screen, swipe down to display settings.
2. Select WiFi.
3. Select your current network.
4. Select Advanced.
5. Make sure that IP settings is set to DHCP.
Still having issues? Feel free to submit a ticket or click on the live chat button for additional assistance. We are available Monday – Friday, from 10AM – 6PM EDT and Saturday and Sunday, from 12PM – 6PM EDT
Order and Set Up Your Static IP Address – CenturyLink
Block Size
Monthly Rate
One Time Charge
Single IP (0 assignable*)
$15
$75
8 (5 assignable)
$25
16 (13 assignable)
$40
32 (29 assignable)
$64
64 (61 assignable)
$128
* Leasing a single static IP address provides an IP address to be used by your modem. If you need to assign an IP address to a device behind your modem, you will need to lease a block of IPs.
When you lease a static IPv4 address, those addresses have ‘derived IPv6’ addresses associated to them, so there is no need to order anything else. But, you will need to enable IPv6 on your modem.
Customers with a dynamic IP address cannot turn off port 25 filtering.
If you have leased static IPs and need assistance with port 25 filtering, or if you would like to lease static IP addresses from CenturyLink, please contact us.
The lease on static IP addresses continues until you either choose to delete them from your account, or until you cancel your CenturyLink internet service.
For customers only: Only one domain name can be assigned to a specific IP address. For example, and are considered one domain name. However, and are considered two separate domain names and both could not be assigned to the same static IP address.
Note that moving or upgrading your service will usually require a change to your static IP address.
Contact us to lease a single static IP address.
Allow one full hour for your request to be processed.
Reboot your modem by unplugging the power cord and waiting for 3 minutes.
Plug the power cord back into your modem, then watch for the internet light to turn green.
Verify that your new IP address is visible by looking it up at. Once you’ve confirmed that, you’re done!
If you are having trouble, contact tech support.
Contact us to lease a block of IP addresses.
Verify that at least one of your static IP addresses is visible by looking it up at Configure your modem’s WAN settings, following the instructions for PPPoE Setup > Static IP Block.
If you cancel a single static IP lease, you do NOT need to reconfigure your modem.
If you cancel an IP block lease and your modem was configured for that block, you will need to reconfigure your modem to use a dynamic IP. To do this, configure your modem’s WAN settings, following the instructions for PPPoE Setup > PPPoE with dynamic IP.
Frequently Asked Questions about where to get static ip address
Where can I find my static IP address?
Check for Static IP Address in WindowsOpen the Window search box, and search “Network Status”Select “Change adapter optons”Right click on the WiFi and/or ethernet adapter and select Properties.Highlight Internet Protocol Version 4 (TCP/IPv4) and click Properties.More items…•May 8, 2019
How much does it cost to get a static IP address?
Static IP costsBlock SizeMonthly RateOne Time ChargeSingle IP (0 assignable*)$15$758 (5 assignable)$25$7516 (13 assignable)$40$7532 (29 assignable)$64$751 more row
How can I get a static IP address for free?
How to Get a Free Static IP AddressClick on “Start” from your PC’s desktop, then select “Run.” In the box that appears, type in “cmd.”Type “ipconfig/all” in the black command prompt on your screen. … Click on “Start” again then right-click on “Network.” This opens the “Network and Sharing Center” in Windows Vista.More items…